[jdev] jabberd2s10 crashes on FC4 with muc-conf/jcr

[Norman Rasmussen]

See this link for an example of how to do that sort of stuff.
http://www.amule.org/wiki/index.php/Backtraces

On 1/2/06, driver at enjine.net <driver at enjine.net> wrote:
> > see if you can get a core dump, then load it up in gdb for a full
> > backtrace with filenames and line numbers.
> >
> > On 12/31/05, driver at enjine.net <driver at enjine.net> wrote:
> >> yeah -- i've got it built with debugging on. i also have the logs but
> >> there's nothing out of the ordinary in them. i build jabberd2, applied
> >> the
> >> flash patch, then compiled jcr/mu-conference and attached it. it was
> >> running fine for a few hours -- then it started crashing after a few
> >> clients were connected, and now it wont even start up.
> >>
> >>
> >>
> >> > unfortunatly that Backtrace isn't going to help anyone.  Is there any
> >> > chance you could rebuild jabberd with debugging information?
> >> >
> >> > I'm not exactly sure how to enable debugging on jabberd2, but it can't
> >> > be that different from http://www.amule.org/wiki/index.php/Backtraces
> >> >
> >> > On 12/31/05, driver at enjine.net <driver at enjine.net> wrote:
> >> >> anyone have this problem..
> >> >> it runs fine for a while but once i have 3 or 4 different clients
> >> >> (xiff/tkabber/trillian/gush) all connected it shits the bed..
> >> >>
> >> >> WTF???!?!
> >> >>
> >> >> here's the backtrace --
> >> >>
> >> >> *** glibc detected *** /usr/local/bin/c2s: double free or corruption
> >> >> (!prev): 0x0a0151e8 ***
> >> >> ======= Backtrace: ========> /lib/libc.so.6[0x213424]
> >> >> /lib/libc.so.6(__libc_free+0x77)[0x21395f]
> >> >> /usr/local/bin/c2s[0x80576b4]
> >> >> /usr/local/bin/c2s[0x80536c4]
> >> >> /usr/local/bin/c2s[0x804ecd7]
> >> >> /usr/local/bin/c2s[0x807baeb]
> >> >> /usr/local/bin/c2s[0x804dc23]
> >> >> /usr/local/bin/c2s[0x8057a6c]
> >> >> /usr/local/bin/c2s[0x8053a24]
> >> >> /usr/local/bin/c2s[0x8050140]
> >> >> /usr/local/bin/c2s[0x8057a6c]
> >> >>
> >>
> >>
> >
> >
> > --
> > - Norman Rasmussen
> >  - Email: norman at rasmussen.co.za
> >  - Home page: http://norman.rasmussen.co.za/
> >
>
>
> i don't think i know hoe to get a core dump.
> and i also don't knoe what you mean when you say 'load it up in gdb for a
> full backtrace with filenames and line numbers' sorry.
>
>


--
- Norman Rasmussen
 - Email: norman at rasmussen.co.za
 - Home page: http://norman.rasmussen.co.za/