[jdev] jabberd2s10 crashes on FC4 with muc-conf/jcr

[Norman Rasmussen]

see if you can get a core dump, then load it up in gdb for a full
backtrace with filenames and line numbers.

On 12/31/05, driver at enjine.net <driver at enjine.net> wrote:
> yeah -- i've got it built with debugging on. i also have the logs but
> there's nothing out of the ordinary in them. i build jabberd2, applied the
> flash patch, then compiled jcr/mu-conference and attached it. it was
> running fine for a few hours -- then it started crashing after a few
> clients were connected, and now it wont even start up.
>
>
>
> > unfortunatly that Backtrace isn't going to help anyone.  Is there any
> > chance you could rebuild jabberd with debugging information?
> >
> > I'm not exactly sure how to enable debugging on jabberd2, but it can't
> > be that different from http://www.amule.org/wiki/index.php/Backtraces
> >
> > On 12/31/05, driver at enjine.net <driver at enjine.net> wrote:
> >> anyone have this problem..
> >> it runs fine for a while but once i have 3 or 4 different clients
> >> (xiff/tkabber/trillian/gush) all connected it shits the bed..
> >>
> >> WTF???!?!
> >>
> >> here's the backtrace --
> >>
> >> *** glibc detected *** /usr/local/bin/c2s: double free or corruption
> >> (!prev): 0x0a0151e8 ***
> >> ======= Backtrace: ========> /lib/libc.so.6[0x213424]
> >> /lib/libc.so.6(__libc_free+0x77)[0x21395f]
> >> /usr/local/bin/c2s[0x80576b4]
> >> /usr/local/bin/c2s[0x80536c4]
> >> /usr/local/bin/c2s[0x804ecd7]
> >> /usr/local/bin/c2s[0x807baeb]
> >> /usr/local/bin/c2s[0x804dc23]
> >> /usr/local/bin/c2s[0x8057a6c]
> >> /usr/local/bin/c2s[0x8053a24]
> >> /usr/local/bin/c2s[0x8050140]
> >> /usr/local/bin/c2s[0x8057a6c]
> >>
>
>


--
- Norman Rasmussen
 - Email: norman at rasmussen.co.za
 - Home page: http://norman.rasmussen.co.za/