[jdev] jabberd2s10 crashes on FC4 with muc-conf/jcr

[driver at enjine.net]

yeah -- i've got it built with debugging on. i also have the logs but
there's nothing out of the ordinary in them. i build jabberd2, applied the
flash patch, then compiled jcr/mu-conference and attached it. it was
running fine for a few hours -- then it started crashing after a few
clients were connected, and now it wont even start up.



> unfortunatly that Backtrace isn't going to help anyone.  Is there any
> chance you could rebuild jabberd with debugging information?
>
> I'm not exactly sure how to enable debugging on jabberd2, but it can't
> be that different from http://www.amule.org/wiki/index.php/Backtraces
>
> On 12/31/05, driver at enjine.net <driver at enjine.net> wrote:
>> anyone have this problem..
>> it runs fine for a while but once i have 3 or 4 different clients
>> (xiff/tkabber/trillian/gush) all connected it shits the bed..
>>
>> WTF???!?!
>>
>> here's the backtrace --
>>
>> *** glibc detected *** /usr/local/bin/c2s: double free or corruption
>> (!prev): 0x0a0151e8 ***
>> ======= Backtrace: ========> /lib/libc.so.6[0x213424]
>> /lib/libc.so.6(__libc_free+0x77)[0x21395f]
>> /usr/local/bin/c2s[0x80576b4]
>> /usr/local/bin/c2s[0x80536c4]
>> /usr/local/bin/c2s[0x804ecd7]
>> /usr/local/bin/c2s[0x807baeb]
>> /usr/local/bin/c2s[0x804dc23]
>> /usr/local/bin/c2s[0x8057a6c]
>> /usr/local/bin/c2s[0x8053a24]
>> /usr/local/bin/c2s[0x8050140]
>> /usr/local/bin/c2s[0x8057a6c]
>>